A short review on the manufacturing problems of natural fiber reinforced composites

Ahmer Shah, Abdul Qadeer Dayo, Raja Asif Wagan, Ahthasham Sajid, Azizullah Shaikh, Ghazanfar Mehdi

Abstract


In the modernworld, natural fiber reinforced polymer composites (NFRP) are gaining too much attention due to thelower manufacturing cost and favorable effects on the environment after use. Besides this, the processing problems ofsuch materials always remain a challenge. The bio/natural fiber has some protective layers and coatings causing hindrance for good interactions with polymer for good performance characteristics. Although numerous processes are already developed for overcoming the processing parameters but the desired goals are still not achieved. This short review focus on some useful properties and pre-treatment of fibers used for the manufacturing NFRP along with problems associated with effective remedial solutions. The viewers of this paper will get the basic knowledge and may select the area to study further in this field

Keywords


Natural fiber; composites; treatment of fiber; hybridization of composites

Full Text:

PDF

References


A. K. Mohanty, M. A. Khan, S. Sahoo, and G. Hinrichsen (2000), J. Mater. Sci.35, 2589–2595.

H. D. Rozman, H. Ismail, Z. A. Mohd Ishak (2000), Polym Int, 49, 1273-8.

S. R. Carroll DR, A. M. Siringano, R.M. Saindon, S. C. Gose, M. A. Friedman (2001), Res Cons Recycl, 31, 241-51.

K. Andrzej, K. Bledzki. O. Faruka, F. Hans-Peter, S. Mohini (2012), Progress in Polymer Science, 37, 1552-1596,

T. S. Joseph, C. Pavithran, Polymer (1996), 37, 5, 139-49.

J. K. Joseph, S. Thomas (1999), Compos Sci Technol, 59, 1625-40.

R. L. J. Canchè-Escamilla, J. I. Cuich-Cupul, E. Mendizabal, J.E. Puig, P.J. Herrera-Franco (2002), Compos Part A, 33, 539-49.

R. Kumar, K.C.M. Nair, S. Thomas, S.C. Schit, K. Ramamurthy (2000), Compos Part A, 31, 1231-40.

D. L. Joshi, A. K. Mohanty, S Arora (2004), Compos Part A, 35, 371-6.

W. I. Selke (2004), Compos Part A, 35, 321-6.

P. R. Chen (1994), J Appl Polym Sci, 54, 1781-3.

T. D. N. La Mantia, M. Morreale, C. Vaca-Garcia (2004). Polym Int, 53, 1888-91.

R. H. Khalil, M. N. Ahmad, H. Ismail (2000), Polym Plast Tech Eng, 39, 757-81.

M. M. La Mantia FP, Mohd Ishak ZA. (2005), J Appl Polym Sci, 96, 1906-13.

W. M. Li TQ, Compos Part A (2004), 35, 303-11.

M. M. La Mantia FP (2007), Compos Interf, 14, 685-98.

R. P. Martinie L, Roussel N (2010), CemConcr Res, 40, 2, 226-234.

K. L. A. P. Ausias (2016), Materials and Structures, 49, 4, 1143-11.

U. Rowell RM. Cambridge, "Natural fibers: types and properties. ," (Properties and performance of natural-fiber composites. Woodhead Publishing, 2008.

M. H. Donath S, Mai C. (2006), Holzforschung, 60, 40-6.

B. S. Abdelmouleh M, Belgacem MN, Duarte AP, Ben Salah A, Gandini A (2004), Int J Adhes Adhes, 24, 43-54.

D. TTL, " Investigation on jute fibers and their composites based on polypropylene and epoxy matrices,"Ph.D. thesis, Technischen Universität, Dresden, 2006.

P. D. Biagiotti J, Torre L, Kenny JM. (2004), Polym Compos, 25, 470-9.

C. A. S. H. Yanjun Xie, Zefang Xiao, Holger Militz, Carsten Mai (2010), Composites: Part A, 41, 806-819.

M. G. A. E. K.L. Pickering, T.M. Le (2016), Composites: Part A, 83, 98-112.

M. M. F.P. La Mantia (2011), Compos Part A, 42, 579-588.

F. B. Arbelaiz A, Ramos JA, Mondragon I.(2006), Thermochim Acta, 440, 111-21.

B. A. Gassan J (2001), J Appl Polym Sci vol. 82, 1417-22.

B. A. M. Mustafa A, Shuhimi FF, Ismail N, Amiruddin H, Umehara N. (2015), Mater Des, 67, 577-82.

K. H. Lee BH, Yu WR. (2009), Fiber Polym, 10, 83-90.

P. S. Li X, Tabil LG. (2009), Appl Eng Agr, 25, 525-31.

S. KG (2004), Metal news, 22, 35-40.

A. V. R. Prasad, K. B. Rao, K. M. Rao, K. Ramanaiah, and S. P. K. Gudapati (2015), Intl. Journal of Polymer Anal. Charact, 20, 541-556.

K. M. M. Rao, A. V. R. Prasad, M. N. V. R. Babu, K. M. Rao, and A. V. S. S. K. S. Gupta (2007), Journal of Materials Science, 42, 9, 3266-3272.

G. V. Gassan J (2000), Composites Science and Technology, 60, 2857-63.

B. D. Ragoubi M, Molina S, George B, Merlin A. (2010), Industrial Crops and Products, 31, 344-9.

K. R. Pizzi A, Lecoanet F, Massetau B, Carpentier D, Krebs A, Loiseau F, Molina S, Ragoubi M. (2009), Industrial Crops and Products, 30, 235-40.

G. F. Marais S, Bonnesoeur A, Grenet J, Poncin-Epaillard F, Morvan C, Metayer M. (2005), Composites Part A: Applied Science and Manufacturing, 36, 975-86.

P. S. Sinha E (2009), Journal of Composite Materials, 43, 1791-802.

S. M. Seki Y, Sever K, Erden S, Gulec HA (2010), Fibers and Polymers, 11, 1159-64.

R. K. Haydaruzzaman, M. A.Khan, A.H.Khan, M.A.Hossain (2009), Radiation Physics and Chemistry, 78, 986-993.

M. A. Arsène, K. Bilba, and A. Ouensanga (2007), Bioressour Technol, 68, 1, 58-68.

L. A. Pothan and S. Thomas (2003), Composites Science and Technology, 63, 9, 1231-1240.

K. S. Xu Y, Hosoi K, Kawai T, Kuroda S.(2009), EXPRESS Polymer Letters, 3, 657-64.

A. A. Cantero G, Llano-Ponte R, Mondragon I (2003), Composites Science and Technology, 63, 1247-54.

Y. Seki (2009), Materials Science and Engineering A, 508, 247-252.

B. ETN (2000), Applied Composite Materials, 7, 331-9.

S. M. Goda K, Gomes A, Kaji T, Ohgi J (2006), Composites Part A: Applied Science and Manufacturing, 37, 2213-20.

S. B. Ray D, Rana AK, Bose NR. (2001), Composites Part A: Applied Science and Manufacturing, 32, 119-27.

S. N. Qin C, Xiuyuan N, Peijs T. (2008), Carbohydrate Polymers, 71, 458-67.

A. R. Iannace S, Nicolais L.(2001), Journal of Applied Polymer Science, 79, 1084-91.

K. M. Mohanty AK, Misra M, Hinrichsen G. (2000), PMSE Preprints, 82, 29-30.

T. S. Rout J, Nayak SK, Misra M, Mohanty AK. (2001), Journal of Applied Polymer Science, 79, 1169-77.

Z. N. Tserki V, Simon F, Panayiotou C. (2005), Composites Part A: Applied Science and Manufacturing, 36, 1110-8.

B. C. Zafeiropoulos NE, Hodgkinson JM. (2002), Composites Part A: Applied Science and Manufacturing, 33, 1185-90.

W. D. Zafeiropoulos NE, Baillie CA, Matthews FL. (2002), Composites Part A: Applied Science and Manufacturing, 33, 1083-93.

B. C. Zafeiropoulos NE, (2007), Composites Part A: Applied Science and Manufacturing, 38, 629-38.

D. G. Zafeiropoulos NE, Baillie CA. (2007), Composites Part A: Applied Science and Manufacturing, 38, 621-8.

N. J. Mishra S, Patil YP. (2000), Composites Science and Technology, 60, 1729-35.

B. A. Gassan J (2000), Applied Composite Materials, 7, 373-85.

L. T. Aranberri-Askargorta I, Bismarck A. (2003), Journal of Colloid and Interface Science, 263, 580-9.

J. K. Joseph PV, Thomas S, Pillai CKS, Prasad VS, Groeninckx G, Sarkissova M. (2003), Composites Part A: Applied Science and Manufacturing, 34, 253-66.

A.-A. I. Bismarck A, Springer J, Lampke T, Wielage B, Stamboulis A, Shenderovich I, Limbach HH. (2002), Polymer Composites, 23, 872-94.

G. J. Bledzki AK, Mildner I. (2001), Composite Interfaces, 8, 443-52.

L. T. Wielage B, Utschick H, Soergel F. (2003), Journal of Materials Processing Technology, 139, 140-6.

L. Liu, L. Cheng, L. Huang, and J. Yu (2012), Fibers and Polymers, 13, 5, 600-605.

R. H. Saleem Z, Pudel F, Grimm E. (2008), Composites Science and Technology, 68, 471-6.

T. B. Lipp-Symonowicz B, Wolukanis A, Wrzosek H. (2004), Fibres & Textiles in Eastern Europe, 12, 61-5.

M. A. Rana AK, Mitra BC, Jacobson R, Rowell R, Banerjee AN (1998), J Appl Polym Sci, 69, 2, 329-38.

S. P. Sain M, Law S, Bouilloux A (2005), J Reinf Plast Comp, 24, 2, 121-30.

M. Zampalonib, F. Pourboghrata, S.A. Yankovicha, B.N. Rodgersa, J. Moorea, L.T. Drzalb, A.K. Mohantyc, M. Misrab (2007), Composites Part A: Applied Science and Manufacturing, 38, 6, 1569-1580.

Nitinat Suppakarn, Kasama Jarukumjorn (2009), Composites Part B: Engineering, 40, 7, 613-618.

S. N. M. Amanda C. Lima, Kestur G. Satyanarayana (2012), Journal of Polymers and the Environment, 20, 1, 245-253.

R. W. W. Shubhashini Oza, Dr. N. A. Lu (2011), International Journal of Applied Science and Technology, 1, 5.

H. I. Xuan Viet Cao, Azura A. Rashid, Tsutomu Takeichi, Thao Vo-Huu, (2011), BioResources, 6, 3, 3260-3271.

H. Ismail, A. H.Abdullah,A. A-Bakar (2010), Journal of reinforced plastics and composites, 29, 16, 2489_9.

S. K. N. Smita Mohanty (2006), Journal of applied polymer science, 102, 4, 3306-3315.

A. C. Gautam Sarkhel (2008), Journal of applied Polymer Science, 108, 6, 3442-3453.

K. Sever (2010), Journal of reinforced plastics and composites, 29, 13, 1921-9.

J. A. N. Nicole‐Lee M. Robertson, Kirill Alemaskin, John D. Wolodko (2013), Journal of Applied Polymer Science, 130, 2.

W. M. Schirp A (2005), Wood Fiber Sci, 37, 643-52.

M. Misra, A. K. Mohanty, L.T. Drzal, "Natural fibers, biopolymers, and biocomposites," CRC Press, Taylor & Francis, 2005.

W. M. Schirp A (2006), J Appl Polym Sci, 99, 3138-46.

O.-R. H. Lomelí-Ramírez MG, Fuentes-Talavera FJ, García-Enriquez S, Cerpa-Gallegos MA, Silva-Guzmán JA. (2009) , Int Biodeter Biodegr, 63, 1030-5.

A. M. Bisanda ETN (1991), Compos Sci Technol, 41, 165-78.

B. A. Gassan J (1997), Polym Compos, 18, 179-84.

C. C. Ibach RE, "Biological resistance of polyethylene composites made with chemically modified fiber or flour. ," in Proceedings of the 6th pacific rim bio-based composites symposium, Portland, OR, USA, 2002, pp. 574-84.

A. K. H. Hill CAS (2000), J Appl Polym Sci, 77, 1322-30.

Z. E. Aji IS, Abdan K, Sapuan SM, Khairul MD. (2012), J Compos Mater, 47, 8, 979-90.

J. K. Idicula M, Thomas S. (2010), J Reinf Plast Compos, 29, 1, 12-29.




DOI: http://dx.doi.org/10.36785/jaes.v9i2.275

Creative Commons License
Journal of Applied and Emerging Sciences by BUITEMS is licensed under a Creative Commons Attribution 4.0 International License.
Based on a work at www.buitms.edu.pk.
Permissions beyond the scope of this license may be available at http://journal.buitms.edu.pk/j/index.php/bj

Contacts | Feedback
© 2002-2014 BUITEMS